View Categories

Syncing a Quantum Transmitter (Belly Box) to the Action Trackporter®

< 1 min read

Syncing a Quantum Transmitter (Belly Box) to the Action Trackporter®

  1. Start with both Trackporter® and transmitter powered “OFF”.
  2. Press and hold the ENABLE button and the WINCH CONTROL JOYSTICK in the UP position, at the same time release the E-STOP. Hold for 10 seconds.
  3. Release the ENABLE and WINCH CONTROL JOYSTICK when the ENABLE and TRANSMITTER POWER INDICATORS start blinking.
  4. Rotate main power switch to the ON position. Only the ENABLE INDICATOR (Green) should start to blink on the Transmitter.
  5. Press and hold the ENABLE button until the ENABLE INDICATOR LED turns solid green and synching is complete.

 

Transmitter